Water Vending Machine Parts

Leading Wholesale Distributor of pulse signal water flow sensor sen-hz06c-e, saier solenoid valve and sanlixin solenoid valve from Mumbai.

Pulse Signal Water Flow Sensor Sen-hz06c-e

Product Price: Rs 350 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Details:

Water quality requirement	drinking water health standards,0~60 degree celcius
Custom made	Wire harness specification,the direction of water inlet and outlet,low power operation mode.
Insulation resistance	more than 100M ohms
Output level	Rated voltage DC5V,high level more than 4. 5V,low level less than or equal to 5V
Pulse duty cycle	50%
Cumulative flow conversion	1L(H2O)=4021 pulse,accuracy 5%-8%
Flow range	0.4-2.3L/M
Withstand hydraulic pressure	less than 1.0MPa
Voltage/ electric current	DC4.5-18V,less than or equal to 15mA,be customized DC24V
Electrical strength	AC500V,50HZ

FDA certification, POM materials, apply to water dispenser, water purifier, coffee machine, tea brewing machine, beer machine etc.

Additional Information:

Get Best QuoteRequest A Callback

Product Price: Rs 300 / PieceGet Best Price

Product Details:

Media	Water
Usage/Application	Vending Machines
Brand	Saier
Material	Cast Copper
Starting Characteristic	0~0.02 MPa
Temperature	0-80 degC
Withstand Hydraulic Pressure	0 ~0.02 MPa

Technical Parameters:

Used Medium: Water, high temperature(0-80degC), non pressure drain can be customized.
Withstand hydraulic pressure: 0 ~0.02MPa, instantaneous maximum pressure: <=1.2MPa.
Starting Characteristic : 0~0.02MPa, rated voltage +-10% should start.
Voltage characteristic: In the range of use of water, when the supply voltage is between 0.9~1.1 times,the solenoid valve should be normally open and closed.
Sealing Performance: Inlet pressure is below 0.02MPa, lasts 1 minutes,leakage<=0.1ml; below 0.02~0.8MPa, no leakage
Insulation resistance: Conductive parts and exposed non charged metal parts>=20MΩ
Reliability: When 0.01~0.02MPa, below 1.1 times rated voltage,turn on 3 seconds, turn off 3 seconds,last 7 x 24H (about 100 thousand times) no abnormalities.

Details:

Get Best QuoteRequest A Callback

Product Price: Rs 1,750 / PieceGet Best Price

Product Details:

Technical Parameters:

2-way normally closed solenoid valves.Closed when de-energized,open when energized.
Serialized Products, small in size,large-flow rate.
Diaphragm Seals: NBR,VITON, EPDM, SILICA GEL.
Plastic Body: Its advantages are low cost,light, good appearance and easy to install.

Products:

Plastic Series 2/2-Way Zero Press Differential Solenoid Valve.
Plastic Series 2/2-Way Zero Press Differential Solenoid Valve-Normally Closed (ZS1DF12N7E20)
Plastic Series 2/2-Way Zero Press Differential Solenoid Valve-Normally Closed (ZS1DF02N7D16)
Plastic Series 2/2-Way Zero Press Differential Solenoid Valve-Normally Closed (ZS1DF02N7G25)

Get Best QuoteRequest A Callback

Thank youYour Enquiry has been sent successfully.