- Home
- ยป
- Our Product Range
- »
- Pressure Sensors
Pressure Sensors
Pressure Sensor ABP2MDAN002ND2B3XX
Minimum Order Quantity: 1000 Piece
Product Brochure
| Max pressure range | 1000 bar |
| Type | Differential |
| Brand | Honeywell |
| Part Number | ABP2MDAN002ND2B3XX |
| Accuracy | +-0.25% |
| Operating Pressure Range | -0.07PSI ~ 0.07PSI (-0.5kPa ~ 0.5kPa) |
- The ABP2 Series are piezoresistive silicon pressure sensors offering a digital output for reading pressure over the specified full scale pressure span and temperature range.
- They are calibrated and temperature compensated for sensor offset, sensitivity, temperature effects and accuracy errors (which include non-linearity, repeatability and hysteresis) using an on-board Application Specific Integrated Circuit (ASIC).
- Calibrated output values for pressure and temperature are updated at approximately 200 Hz.
- All products are designed and manufactured according to ISO 9001 standards.
- The liquid media option includes an additional gel coating to protect the electronics under port P1, which enables use with non-corrosive liquids (e.g. water and saline) and in applications where condensation can occur. The ABP2 Series is available in tube packaging.
- Pocket tape and reel packaging is available upon request.
• Total Error Band (see Figure 1): As low as ±1.5 %FSS
• Liquid media option: Compatible with a variety of liquid media
• Long-term stability: as low as ±0.2 %FSS
• Accuracy: ±0.25 %FSS BFSL
• Wide pressure range: ±6 mbar to ±12 bar | ±600 Pa to ±1.2 MPa | ±2 inH2O to ±175 psi
• High burst pressures
• Wide operating temperature range of -40°C to 110°C [-40°F to 230°F]
• Calibrated over wide temperature range of -40°C to 110°C [-40°F to 230°F]
• 24-bit digital I2C or SPI-compatible output
• IoT (Internet of Things) ready interface
• Ultra-low power consumption (as low as 0.01 mW typ. average power, 1 Hz measurement frequency)
• Meets IPC/JEDEC J-STD-020E Moisture Sensitivity Level 1
• REACH and RoHS compliant
• Food grade compatible
• Temperature output available
• NSF-169, LFGB and BPA compliant materials
APPLICATIONS :
• Medical: Ventilators/portable ventilators, CPAP, blood analysis, blood pressure monitoring, breast pumps, drug dosing, hospital beds, massage machines, oxygen concentrators, patient monitoring, sleep apnea equipment, urine analyzers and wound therapy
• Industrial: HVAC transmitters, life sciences, material handling, pneumatic control and regulation, process gas monitoring and valve positioning/ positioners
• Commercial: Air beds, coffee makers, washing machines, level measurement, dish washers, vacuum cleaners, hand dryers and rice cookers
• Transportation: Air brakes, CNG monitoring, fork lifts and fuel level measurement
Honeywell Sensor SS513GT
Minimum Order Quantity: 1000 Piece
Product Brochure
| Number Of Pins | 8 Pins |
| Brand | Honeywell |
| Part Number | SS513GT |
| Series | SS500 Series |
| Supply Voltage - Max: | 30V |
| Supply Voltage - Min: | 3.8V |
- The SS400 Series and SS500 Series are small and versatile digital Hall-effect devices that are operated by the magnetic field from a permanent magnet or an electromagnet, and are designed to respond to alternating North and South poles, or to a South pole only.
- They are available in bipolar, latching or unipolar magnetics.
- On-board regulation provides stable operation over a 3.8 Vdc to 30 Vdc supply voltage range.
- These sensors are capable of continuous 20 mA sinking output and may be cycled as high as 50 mA max.
- The 3.8 V capability allows for use in many potential low voltage applications. The digital, open collector sinking-type output is easily interfaced with a wide variety of electronic circuits.
- To provide reliable products and consistent quality, the SS400 Series products are tested at both 25°C [75°F] and 125°C [257°F]. All catalog listings are qualified for operation up to 150°C [302°F].
- For design flexibility, these product are available in the following package styles:
- • SS400 Series: Flat TO-92-style: - SS4XX: Straight standard leads, bulk pack - SS4XX-L: Straight long leads, bulk pack - SS4XX-T2: Formed leads, ammopack tape-in-box - SS4XX-T3: Straight standard leads, ammopack tape-in-box - SS4XX-S: Surface mount, bulk pack - SS4XX-SP: Surface mount, pocket tape and reel
- • SS500 Series: SOT-89B, pocket tape and reel
• Quad Hall IC design minimizes mechanical stress effects
• Temperature-compensated magnetics help provide stable operation over a wide temperature range of -40°C to 150°C [-40°F to 302°F]
• Broad, inclusive supply voltage capability from 3.8 Vdc to 30 Vdc for application flexibility
• Digital, open collector sinking output for easy interfacing with a variety of common electronic circuits
• High sensitivity versions available for potential applications requiring high accuracy or wide gaps
• Bipolar, latching or unipolar magnetics
XGZP6895A500(MPX5500DP) Pressure Sensor
| Pressure Range | 500 Pa |
| Part Number | XGZP6895A500(MPX5500DP) |
| Product Range | MPX5500 Series |
| Applications | Computers & Computer Peripherals |
| Pressure Type | Differential |
| Accuracy | +- 2.5% |
- XGZP6895A is a prefect silicon pressure sensor offering a ratiometric analog interface for reading differential pressure over the specified full scale pressure span and temp.range.
- The XGZP6895A incorporates a silicon piezoresistive pressure sensor chip and an interior signal-conditional Application Specific Integrated Circuit(ASIC) in a SIP package with two air vents and long 6 PIN, which can be mounted freely from different direction.
- The XGZP6895A is fully calibrated and temperature compensated for offset,sensitivity, temperature and non-linearity, so XGZP6895A pressure sensor satisfy the prefect repeatability,linearity, stability and sensibility, which can be applied directly in medical&healthy, home appliances, consumer electronic, industry, automotive, loT and other pneumatic devices etc.
- XGZP6895A pressure sensor is for high volume application at an affordable cost and perfect performance.
XGZP194-050G Pressure Sensor
Product Brochure
| Pressure Range | 500 Pa |
| Type | Differential |
| Part Number | XGZP194-050G |
| Power Supply | 10Vdc |
| Output Type | Non-amplified Analog |
| Package | Plastic Tube |
XGZP194 is a surface mounting pressure sensor based on CFSensor silicon-glass based piezoresistive pressure sensor die. The sensor die is bonded on a substrate with a plastic cap and packaged in a 6-pin SIP housing. The built-in circuit calibrates and compensates the sensor’s zero output, full-scale output, temperature drift and other parameters, and generates a high-precision standard voltage output signal proportional to the supply voltage.
The small size and high reliability of integration make this sensor a simple and economical choice for high volume application in a variety of industries. With standard SMD PIN, XGZP194 is easy for users to install by board mounting.
The XGZP194 pressure sensor is intended for use with non-corrosive gas or air. It is highly prohibited to choke the side of pressure diaphragm during actual application. Please consult us if a pressure medium other then air is to be used.
- For medical and healthy equipment, e.g. Patient Monitoring, Infusion and Syringe Pumps, Anesthesia machines, Respirators and Ventilators, NPWT, DVT, Catheter, COPD Treatment, Kidney dialysis, Cupping&Cosmetology, Hospital beds, Massage device etc.
- For white goods and consumer electronics, e.g. Refrigerator, Printer, Humidifier, Washer/Dryer, Coffee machine, Dust collector or Cleaner, Robotic ,Sport equipment etc.
- For more fields, e.g. Digital display meter, Air pump, Process control, Pressure switching, HVAC and pneumatic device, Air flow monitor, Automation, Automotive electronic,Intelligent fire control system etc.
Differential Pressure Transducer Model FP2000
Minimum Order Quantity: 1 Piece
Product Brochure
| Suitable Media | Liquid |
| Brand | Honeywell |
| Part Number | FP2000 |
| Pressure Range | 35 mbarD to 70 barD |
| Accuracy | 0.10% |
| Output | mV, amplified output in option |
| Supply Voltage | 10 VDC, or 9 to 28 VDC |
| Housing Material | Stainless Steel |
| Operating Temperature | -40 to 116 DegreeC if not amplified |
POTENTIAL APPLICATIONS • Test stands (automotive, aerospace, and industrial) • R&D test labs • Hydraulic and pneumatic system monitoring • Leak detection • Pump and compressor control • Tank level measurement • Monitor pressure changes for preventive maintenance • Flow rate measurement
High Pressure Transducers Model HP
Minimum Order Quantity: 1 Piece
Product Brochure
| Suitable Media | Liquid |
| Transducer Type | Strain gauge |
| Brand | Honeywell |
| Part Number | Model HP |
| Accuracy | 0.5% |
| Output | mV/V, 4 mA to 20 mA, 0 Vdc to 5 Vdc, or 0 Vdc to 10 Vdc |
| Housing Material | Stainless Steel |
DIGITRANS HTT-411 Differential Humidity Temperature Transmitter
Product Brochure
| Humidity | % RH : +- 2.0% |
| Supply Voltage | 12 - 24 VDC |
| Output | 4-20 mA / 0 - 10 V ( 3 Wire) |
| Temperature | 0oC to 50oC |
| Communication | USB / RS485 |
'DIGITRANS' Differential humidity temperature transmitter incorporates an IP 65 rugged ABS enclosure, which can be mounted on wall or inside equipment cabinet . It is designed for pharmaceutical clean room and HVAC application with a precision accuracy ±0.5%of Temperature and ±2.0% of RH. It can be easily configured via USB interface to PC .
Features :
- Accuracy ±2% of Rh and ±0.5% of Tempetature
- Easy to install and suitable for panel mounting
- Two analog output with 3 Wire operation
- Easy to configured via USB interface
- Clean Room Monitoring
- HVAC & Process control
- Pharmaceuticals equipment
- Green House Monitoring
XGZP6858A15115KPAL0 Pressure Sensor
Minimum Order Quantity: 1000 Piece
Product Brochure
| Part Number | XGZP6858A15115KPAL0 |
| Pressure Range | 0 to 700 kPa |
| Response Time | 2.5 mS |
| Power Supply | Optional 5V or 3.3V |
| Application | Liquid level measurement, White goods(e.g.washer), Heating, Ventilation, Air conditioning |
XGZP6858A is a perfect silicon pressure sensor offering a radiometric analog interface for reading pressure over the specified full scale pressure span.
The XGZP6858A incorporates a silicon piezoresistive pressure sensor die and an interior Application Specific Integrated Circuit(ASIC) in a SMT package.
The XGZP6858A is fully calibrated and temperature compensated for specified span, so XGZP6858A pressure sensor satisfy the perfect accuracy, which is designed for a wide range of application in medical care&health, home appliances, consumer electronic, industry, automotive, loT and other pneumatic devices etc. by utilizing a microcontroller or microprocessor with A/D inputs.
FEATURES :-Board Mount Pressure Sensor HIH-4021-001
Product Brochure
| Suitable Media | Liquid |
| Brand | Honeywell |
| Part Number | HIH-4021-001 |
| Accuracy | +-3.5% RH |
| Operating Temperature | -40 DegreeC ~ 85 DegreeC |
| Product Series | HIH-4021 |
| Type | Absolute |
| Sensor Type | Gauge |
- The HIH-40104020/4021 Series Humidity Sensors are designed specifically for high volume OEM (Original Equipment Manufacturer) users.
- Direct input to a controller or other device is made possible by this sensor’s near linear voltage output.
- With a typical current draw of only 200 µA, the HIH-4010/4020/4021 Series is often ideally suited for low drain, battery operated systems.
- Tight sensor interchangeability reduces or eliminates OEM production calibration costs. Individual sensor calibration data is available.
- The HIH-4010/4020/4021 Series delivers instrumentationquality RH (Relative Humidity) sensing performance in a competitively priced, solderable SIP (Single In-line Package).
• Molded thermoset plastic housing
• Near linear voltage output vs %RH
• Laser trimmed interchangeability
• Low power design
• Enhanced accuracy
• Fast response time
• Stable, low drift performance
• Chemically resistant
POTENTIAL APPLICATIONS :
• Refrigeration equipment
• HVAC (Heating, Ventilation and Air Conditioning) equipment
• Medical equipment
• Drying
• Metrology
• Battery-powered systems
• OEM assemblies
XGZP192-201G Pressure Sensor
Product Brochure
| Type | Gauge |
| Brand | CF Sensor |
| Part Number | XGZP192-201G |
| Pressure Range | 0 ~ 200 kPa |
| Output | mV(millivolt) |
| Package | Tray |
| Output Type | Non-amplified Analog |
XGZP192 is a surface mounting pressure sensor based on CFSensor silicon piezoresistive pressure sensor die. The sensor die is bonded on a substrate with a plastic cap and packaged in a 4-pin housing. The sensor’s zero output, full-scale output, temperature drift and other parameters have been calibrated and compensated by laser trimming. The sensor generates a high-precision standard voltage output signal proportional to the supply voltage.
The small size and high reliability of integration make this sensor a simple and economical choice for high volume application in a variety of industries. With standard PIN interface, XGZP192 is easy for users to install by through-hole mounting.
The XGZP192 pressure sensor is intended for use with non-corrosive gas or air. It is highly prohibited to choke the side of pressure diaphragm during actual application. Please consult us if a pressure medium other then air is to be used.
APPLICATIONS
- Medical & Healthcare
- Industrial & Automation
- Domestic Appliance
- Consumer Electronic
- Automotive Electronic
Pressure Sensor ABP2DANT150PGAA5
Product Brochure
| Type | Gauge |
| Suitable Media | Gas |
| Part Number | ABP2DANT150PGAA5 |
| Pressure Range | 150Psi Gage |
| Accuracy | +-0.25 %FSS BFSL |
| Application | Medical,Transportation,Industria,Commercial |
The ABP2 Series are piezoresistive silicon pressure sensors that can measure pressure over the designated full scale pressure span and temperature range using either a digital or analogue output. Using an on-board application-specific integrated circuit, they are calibrated and temperature corrected for sensor offset, sensitivity, temperature effects, and accuracy faults (which include non-linearity, repeatability, and hysteresis) (ASIC). Pressure and temperature calibration output data are refreshed every 200 Hz. Each product is created and assembled in accordance with ISO 9001 standards. The liquid media option allows for usage with non-corrosive liquids (such as water and salt) and in situations where condensation may occur. It also contains an extra gel covering to safeguard the electronics underneath port P1. Tube packaging is offered for the ABP2 Series.
Features:- Total Error Band (see Figure 1): As low as ±1.5 %FSS.
- Liquid media option: Compatible with a variety of liquid media.
- Long-term stability: as low as ±0.2 %FSS.
- Accuracy: ±0.25 %FSS BFSL.
- Wide pressure range: ±6 mbar to ±12 bar |±600 Pa to ±1.2 MPa | ±2 inH2O to ±175 psi.
- High burst pressures.
- Wide operating temperature range of -40°C to 110°C [-40°F to 230°F].
- Calibrated over wide temperature range of -40°C to 110°C [-40°F to 230°F].
- 24-bit digital I2C or SPI-compatible output.
- IoT (Internet of Things) ready interface.
- Ultra-low power consumption (as low as 0.01 mW typ. average power, 1 Hz measurement frequency)
Pressure Sensor ABP2MDAN002ND2B3
Product Brochure
| Type | Differential |
| Suitable Media | Gas |
| Brand | Honeywell |
| Part Number | ABP2MDAN002ND2B3 |
| Pressure Range | +-2 inH20 Differential |
| Accuracy | +-0.25 %FSS BFSL |
| Application | Medical: Ventilators/portable ventilators, CPAP, blood analysis Industrial: HVAC transmitters, life |
The ABP2 Series are piezoresistive silicon pressure sensors that can measure pressure over the designated full scale pressure span and temperature range using either a digital or analogue output. Using an on-board application-specific integrated circuit, they are calibrated and temperature corrected for sensor offset, sensitivity, temperature effects, and accuracy faults (which include non-linearity, repeatability, and hysteresis) (ASIC). Pressure and temperature calibration output data are refreshed every 200 Hz. Each product is created and assembled in accordance with ISO 9001 standards. The liquid media option allows for usage with non-corrosive liquids (such as water and salt) and in situations where condensation may occur. It also contains an extra gel covering to safeguard the electronics underneath port P1. Tube packaging is offered for the ABP2 Series.
Features:- Total Error Band (see Figure 1): As low as ±1.5 %FSS.
- Liquid media option: Compatible with a variety of liquid media.
- Long-term stability: as low as ±0.2 %FSS.
- Accuracy: ±0.25 %FSS BFSL.
- Wide pressure range: ±6 mbar to ±12 bar |±600 Pa to ±1.2 MPa | ±2 inH2O to ±175 psi.
- High burst pressures.
- Wide operating temperature range of -40°C to 110°C [-40°F to 230°F].
- Calibrated over wide temperature range of -40°C to 110°C [-40°F to 230°F].
- 24-bit digital I2C or SPI-compatible output.
- IoT (Internet of Things) ready interface.
- Ultra-low power consumption (as low as 0.01 mW typ. average power, 1 Hz measurement frequency)
- Meets IPC/JEDEC J-STD-020E Moisture Sensitivity Level 1
- REACH and RoHS compliant.
Honeywell SSCDANN015PAAA5 Sensor
Product Brochure
| Type | Absolute |
| Suitable Media | Gas |
| Sensor Type | Absolute |
| Brand | Honeywell |
| Product Series | TruStability SSC Series |
| Part Number | SSCDANN015PAAA5 |
| Accuracy | +-0.25% |
| Operating Temperature | -40 DegreeC to 85 DegreeC |
| Pressure Type | Vented Gauge |
| Operating Pressure | 150PSI (1034.21kPa) |
- DIP (dual inline pin) package, single axial barbed port, dry gases only, no diagnostics
- Industry-leading accuracy of ±0.25 %FSS BFSL, small package size, extremely low power consumption
- Protected by multiple global patents, industry-leading long-term stability
- High burst pressures, promotes system reliability and reduces potential system downtime
- High working pressure ranges, industry-leading flexibility
- Energy efficient, reduces system power requirements, enables extended battery life
- Absolute pressure range from 0psi to 15psi
- Analogue output type
- Supply voltage of 5VDC
- Meets IPC/JEDEC J-STD-020D.1 moisture sensitivity level 1 requirement
Honeywell Pressure Sensor 26PCDFG2G
Product Brochure
| Brand | Honeywell |
| Part Number | 26PCDFG2G |
| Accuracy | +-0.2% |
| Application | Board Mount |
| Series | 26PC |
- Miniature Low Pressure Sensors The 26PC Series Miniature Pressure Sensors are small, cost-effective devices intended for use with wet or dry media.
- These sensors feature proven sensing technology that uses a specialized piezoresistive micromachined sensing element to offer high performance, reliability, and accuracy.
- Each sensor contains four active piezoresistors that form a Wheatstone bridge.
- When pressure is applied, the resistance changes and the sensor provides a milliVolt output signal that is proportional to the input pressure.
- The low power 26PC sensors are designed to accommodate pressures from 1 psi to 250 psi and have an operating temperature range of -40 ºC to 85 ºC [-40 ºF to 185 ºF].
- These sensors can accommodate a variety of wet and dry media that are compatible with polyphthalamide (PPA) plastics and media seals specified in the Nomenclature and Order Guide (see Figure 2).
- The 26PC sensors are RoHS compliant.
- They are designed and manufactured according to ISO 9001 standards.
MEDICAL
OXygen Conentrators
May be used to measure the sieve bed pressure to optimize system performance
DENTAL CHAIRS
May be used to control the pneumatic pressure in the various dental instruments HEMODIALYSIS
May be used to monitor the correct pressure to help ensure optimum blood filtration
INDUSTRIAL
Water CONTROL VALVES
May be used to monitor the water consumption in homes and buildings
IRRIGATION EQUIPMENT
May be used to control the water pressure and flow being delivered
FILTER MONITORING
May be used to detect when the filters are clogged and need to be replaced
PRESSURE VALVES
May be used to measure and control pressure in industrial processes
AIR COMPRESSORS
May be used to control the pressure being delivered to the end user equipment breathalizerS May be used to measure the exhalation pressure to ensure proper breath analysis
Honeywell SS449A Sensor
Product Brochure
| Brand | Honeywell |
| Product Series | SS400 |
| Part Number | SS449A |
| Supply Voltage | 3.8V ~ 30V |
| Mounting Type | through hole |
| Operating Temperature | -40 DegreeC ~ 150 DegreeC (TA) |
- The SS400 Series and SS500 Series are small and versatile digital Hall-effect devices that are operated by the magnetic field from a permanent magnet or an electromagnet, and are designed to respond to alternating North and South poles, or to a South pole only.
- They are available in bipolar, latching or unipolar magnetics. On-board regulation provides stable operation over a 3.8 Vdc to 30 Vdc supply voltage range.
- These sensors are capable of continuous 20 mA sinking output and may be cycled as high as 50 mA max.
- The 3.8 V capability allows for use in many potential low voltage applications.
- The digital, open collector sinking-type output is easily interfaced with a wide variety of electronic circuits.
- To provide reliable products and consistent quality, the SS400 Series products are tested at both 25°C [75°F] and 125°C [257°F]. All catalog listings are qualified for operation up to 150°C [302°F]. For design flexibility, these product are available in the following package styles:
-SS4XX: Straight standard leads, bulk pack
- SS4XX-L: Straight long leads, bulk pack
- SS4XX-T2: Formed leads, ammopack tape-in-box
- SS4XX-T3: Straight standard leads, ammopack tape-in-box
- SS4XX-S: Surface mount, bulk pack - SS4XX-SP: Surface mount, pocket tape and reel
• SS500 Series: SOT-89B, pocket tape and reel
FEATURES:
• Quad Hall IC design minimizes mechanical stress effects
• Temperature-compensated magnetics help provide stable operation over a wide temperature range of -40°C to 150°C [-40°F to 302°F]
• Broad, inclusive supply voltage capability from 3.8 Vdc to 30 Vdc for application flexibility
• Digital, open collector sinking output for easy interfacing with a variety of common electronic circuits
• High sensitivity versions available for potential applications requiring high accuracy or wide gaps
• Bipolar, latching or unipolar magnetics
POTENTIAL APPLICATIONS
• Industrial: Speed and RPM (revolutions per minute) sensing, tachometer, counter pickup, flow-rate sensing, brushless dc (direct current) motor commutation, motor and fan control, robotics control
• Transportation: Speed and RPM (revolutions per minute) sensing, tachometer, counter pickup, motor and fan control, electric window lift, convertible roof position
• Medical: Motor assemblies, medication dispensing control
XGZP6895A100KPDN Pressure Sensor
Product Brochure
| Type | Differential |
| Brand | CF Sensor |
| Part Number | XGZP6895A100KPDN |
| Pressure Range | 100 to 0kpa |
| Power Supply | 5V to 4.7V |
Pressure Sensor ABP2DANT015PAAA5
Product Brochure
| Part Number | ABP2DANT015PAAA5 |
| Pressure Range | 15Psi |
| Accuracy | +-0.25 %FSS BFSL |
| Operating Temprature Range | +-6 mbar to +-12 bar |+-600 Pa to +-1.2 MPa | +-2 inH2O to +-175 psi |
| Application | Medical,Industrial,Commercial,Transportation |
The ABP2 Series are piezoresistive silicon pressure sensors that can measure pressure over the designated full scale pressure span and temperature range using either a digital or analogue output. Using an on-board application-specific integrated circuit, they are calibrated and temperature corrected for sensor offset, sensitivity, temperature effects, and accuracy faults (which include non-linearity, repeatability, and hysteresis) (ASIC). Pressure and temperature calibration output data are refreshed every 200 Hz. Each product is created and assembled in accordance with ISO 9001 standards. The liquid media option allows for usage with non-corrosive liquids (such as water and salt) and in situations where condensation may occur. It also contains an extra gel covering to safeguard the electronics underneath port P1. Tube packaging is offered for the ABP2 Series.
Features- Total Error Band (see Figure 1): As low as ±1.5 %FSS.
- Liquid media option: Compatible with a variety of liquid media.
- Long-term stability: as low as ±0.2 %FSS.
- Accuracy: ±0.25 %FSS BFSL.
- Wide pressure range: ±6 mbar to ±12 bar |±600 Pa to ±1.2 MPa | ±2 inH2O to ±175 psi.
- High burst pressures.
- Wide operating temperature range of -40°C to 110°C [-40°F to 230°F].
- Calibrated over wide temperature range of -40°C to 110°C [-40°F to 230°F].
- 24-bit digital I2C or SPI-compatible output.
- IoT (Internet of Things) ready interface.
MPX5999D Pressure Sensor
Minimum Order Quantity: 10 Piece
Product Brochure
| Brand | NXP |
| Part Number | MPX5999D |
| Accuracy | 2.5 % |
| Output | 0.2 V ~ 4.7 V |
| Voltage | 4.75 V ~ 5.25 V |
| Temperature | -40 deg C ~ 125 deg C |
- Series: MPX5999
- Part Status: Active
- Pressure Type: Differential
- Operating Pressure: 145.04 PSI (1000 kPa)
- Output Type: Analog Voltage
- Accuracy: ±2.5%
- Port Style: No Port
- Features: Temperature Compensated
- Termination Style: PCB
- Maximum Pressure: 580.15 PSI (4000 kPa)
- Package / Case: 6-SIP Module
Pressure Transducer
Minimum Order Quantity: 10 Piece
Product Brochure
| Usage/Application | Industrial, Pumps |
| Suitable For | Pumps, Panels |
| Brand | Honeywell |
| Power | 24V DC 12V DC 5V DC 12-36V DC |
| Usage | Pressure Sensor |
| Output | 0.5-4.5V, 0-10V |
We are proclaimed providers of premium finished Pressure Transducer. These products are ideally used for coupling transformers, balancing coils and filter coils. Our skilled agents source these products from reliable and known vendors in the industry. Customers admire the tensile strength, stability, accuracy and efficiency of these products largely. We offer all these products with a guarantee of their strict quality compliance. These are easily available from us at competitive prices.
Features:
- Smooth finish
- Even surface
- Dimensional accuracy
Models in Stock:
| Pressure Transducer | |||||
| Pressure Range | Pressure Type | Output | Connecttor | Port | |
| PX2CG1XX004BACHX | 0 to 4 Bar | Absolute | Current 4-20mA | DIN EN 175301-803C | G 1/4 ISO 1179-3 |
| PX2CG1XX010BACHX | 0 to 10 Bar | Absolute | Current 4-20mA | DIN EN 175301-803C | G 1/4 ISO 1179-3 |
| PX2CG1XX016BSCHX | 0 to 16 Bar | Gage | Current 4-20mA | DIN EN 175301-803C | G 1/4 ISO 1179-3 |
| PX2CG1XX025BSCHX | 0 to 25 Bar | Gage | Current 4-20mA | DIN EN 175301-803C | G 1/4 ISO 1179-3 |
| PX2CG1XX040BSCHX | 0 to 40 Bar | Gage | Current 4-20mA | DIN EN 175301-803C | G 1/4 ISO 1179-3 |
DIGIMACKS Differential Pressure Transmitter S1 series
Product Brochure
| Response Time | 100 - 3000 m Sec (Selectable via Menu) |
| Supply Voltage | 12 - 24 VDC |
| Display | 4 Digit Seven Segment |
| Operating Temperature | 10 Degree to 60 DegreeC |
| Storage Temperature | -30 Degree to +100 Degree C |
- S1 Series Pressure Instrument, which is a microcontroller based. ‘DigimacksR ’ that can be used to directly measure Pressure.
- Differential and Absolute Pressure Gauge which support pressure up to 1000 mm wc.
- The pressure output is displayed in selectable engineering unit of mm wc, and Pa.
- Easy to Install and suitable for Panel Mounting
- Optional Password Protection
- User friendly operations via keypad on face
- Bright easy to read LED display
- Two selectable units : mm Wc and Pa
DPT-411 DIGITRANS Differential Pressure Transmitter
Product Brochure
| Accuracy | 0.5% |
| Model Name/Number | DPT-411 |
| Supply Voltage | 12-24 VDC |
| Communiication | USB and RS485 |
| Operating Temp | 10 Degree to 60 DegreeC |
- DPT-411 'DIGITRANS' Differential
- pressure transmitter incorporates an IP 65 rugged ABS enclosure,
- which can be mounted on wall or inside equipment cabinet .
- It is
- designed for pharmaceutical clean room and HVAC application with
- a precision 0.5% accuracy.
- It can be easily configured via USB
- interface to PC .
- It indicates differential pressure in a units Pa and
- mm Wc.Pressure ranges from 0 to 10 mm Wc to 0 to 250 mm Wc.
- Easy to install and suitable for panel mounting
- Easy to configured via USB interface
- Output signal : 0 - 10 Volt / 4 - 20 mA
- Two selectable units : mm Wc and Pa
- Pressure monitoring in clean rooms
- Monitoring air filters & AHU
- HVAC & process control
- Pharmaceuticals equipment
S1 - 01 - 102 Digimacks Differential Pressure Gauge
Product Brochure
| Pressure Type | Gauge Pressure |
| Model Name/Number | Digimacks Differential Pressure Gauge S1 - 01 - 102 |
| Supply Voltage | 24VDC |
| Dimension | 114 Dia. X 30 mm depth |
| Operating Temperature | 10 Degree to 60 DegreeC |
Ultrasonic Level Sensor UM0017
Minimum Order Quantity: 10 Piece
Product Brochure
| Measurement Range | 0.5-5 m |
| Operating Temperature | -40 to +80 |
| Application | Fuel Level Sensor |
| Pressure | -0.1Mpa~400MPa |
| Process Temp | -40degC~400degC |
| Frequency | 59KHz |
| Input Volt | 140V |
Features:
- Detect underwater, narrow angle with highly direction
- Cannot affect by sewage, high and low temperature resistance;prevent water leakage
- Compact Size, integrative structure
- Multiple installation mode, multiple application environment,suitable in various industries
Applications:
- It could be applied in product like water filter to control the water level in the container.
- With high precision, better control ability and intellectual technology, which makes the product more elegent.
Pressure Sensor ABP2DANT015PGAA5
Minimum Order Quantity: 1000 Piece
Product Brochure
| Type | Gauge |
| Suitable Media | Gas |
| Brand | Honeywell |
| Part Number | ABP2DANT015PGAA5 |
| Pressure Range | 15Psi Gage |
| Accuracy | +-0.25 %FSS BFSL |
| Application | Medical, Industrial, Transportation, Commercial |
The ABP2 Series are piezoresistive silicon pressure sensors that can measure pressure over the designated full scale pressure span and temperature range using either a digital or analogue output. Using an on-board application-specific integrated circuit, they are calibrated and temperature corrected for sensor offset, sensitivity, temperature effects, and accuracy faults (which include non-linearity, repeatability, and hysteresis) (ASIC). Pressure and temperature calibration output data are refreshed every 200 Hz. Each product is created and assembled in accordance with ISO 9001 standards. The liquid media option allows for usage with non-corrosive liquids (such as water and salt) and in situations where condensation may occur. It also contains an extra gel covering to safeguard the electronics underneath port P1. Tube packaging is offered for the ABP2 Series.
Features :- Total Error Band (see Figure 1): As low as ±1.5 %FSS.
- Liquid media option: Compatible with a variety of liquid media.
- Long-term stability: as low as ±0.2 %FSS.
- Accuracy: ±0.25 %FSS BFSL.
- Wide pressure range: ±6 mbar to ±12 bar |±600 Pa to ±1.2 MPa | ±2 inH2O to ±175 psi.
- High burst pressures.
- Wide operating temperature range of -40°C to 110°C [-40°F to 230°F].
- Calibrated over wide temperature range of -40°C to 110°C [-40°F to 230°F].
- 24-bit digital I2C or SPI-compatible output.
- IoT (Internet of Things) ready interface.
- Ultra-low power consumption (as low as 0.01 mW typ. average power, 1 Hz measurement frequency)
- Meets IPC/JEDEC J-STD-020E Moisture Sensitivity Level 1
- REACH and RoHS compliant.
- Food grade compatible.
ASDX Series Analog Low Pressure and Ultra-Low Pressure Sensors
Minimum Order Quantity: 10 Piece
| Pressure Range | 100 psi |
| Brand | Honeywell |
| Supply Voltage | 4.75 V to 5.25 V |
| Operating Temperature (deg. Celsius) | -20 to +105 |
| Accuracy (%) | +-2 |
| Output | 0.5 V to 4.5 V |
| Operating Pressure | +-1 PS |
| Output Type | Analog Voltage |
Our list of products:
ASDXACX015PAAA5 | ASDXAVX005PGAA5 | ASDXRRX001PDAA5 |
ASDXACX030PA2A5 | ASDXAVX015PG7A5 | ASDXRRX001PG7A5 |
ASDXACX030PA7A5 | ASDXAVX015PGAA5 | ASDXRRX001PGAA5 |
ASDXACX030PAAA5 | ASDXAVX030PGAA5 | ASDXRRX005KGAA5 |
ASDXACX100PA2A5 | ASDXAVX100PG2A5 | ASDXRRX005ND2A5 |
ASDXACX100PAAA5 | ASDXAVX100PGAA5 | ASDXRRX005ND7A5 |
ASDXAVX001PG2A3 | ASDXRRX001PD2A5 | ASDXRRX005NDAA5 |
ASDXAVX001PGAA5 | ASDXRRX001PDAA3 |
|
Applications:
- Industrial HVAC/R
- Air Compressors
- General System
- Factory Automation Pump
- Valve And Fluid Pressure
- Transportation System
- Pneumatics
- Hydraulics