- Home
- »
- Our Product Range
- »
- MEGAWIN 8051 Standard MCU
MEGAWIN 8051 Standard MCU
We are a leading Wholesale Distributor of mg87fe52ae megawin 8051 mcu, mg82f6d17al20 megawin 8051 mcu, mg82f6d17ae20 megawin 8051 mcu, mg82f6d16ae28 megawin 8051 mcu, mg82f6d32ad megawin 8051 mcu and mpc89e515ae megawin 8051 mcu from Mumbai, India.
MG87FE52AE Megawin 8051 MCU
Product Price: Rs 50 / PieceGet Best Price
Minimum Order Quantity: 1000 Piece
Product Brochure
Product Details:
Brand | Megawin |
Model Name/Number | MG87FE52AE |
Temperature Range | -40 to +85 Deg C |
Usage/Application | Weighing Scale |
Core Size (Number of Bits) | 8 Bit |
ROM Type | Flash |
Operating Voltage Range | 2.4V~5.5V |
Flash Memory | 8KB |
Communication | UART |
Package | DIP40 |
Flash ROM | 8 KB |
- 80C51 Central Processing Unit
- 8KB On-Chip program memory for program ROM, ISP ROM & IAP zone.
- ISP capability; optional 0.5K/1KB/1.5K~3.5KB ISP memory shared with 8KB flash memory.
- IAP capability; program controlled IAP memory size shared with 8KB flash memory.
- On-Chip 256 bytes scratch-pad RAM. Also, the MCU can address up to 64K bytes external memory.
- MOVC-disabling, encrypting, and locking flash memory realize security mechanism.
- Three 16-bits timer/counter, Timer2 is an up/down counter with programmable clock output on P1.0
- Eight sources, four-level-priority interrupt capability
- Enhanced UART, provides frame-error detection and hardware address-recognition
- Dual DPTR for fast-accessing of data memory
- 15 bits Watch-Dog-Timer with 8-bits pre-scaler, one-time enabled
- Low EMI: inhibits ALE emission
- Power control: Idle mode and Power-Down mode; Power-Down can be woken-up by P3.2/P3.3/P4.2/P4.3,Idle mode could be woken up by all interrupt sources.
- I/O port: 32+4 I/O ports:
- PDIP-40 has 32 I/O ports;
- PLCC-44 & PQFP-44 will have 36 I/O ports
- On-Chip flash program/data memory:
- The data endurance of the embedded flash gets over 20,000 times.
- Greater than 100 years data retention under room temperature. (at 25???)
- Operating Voltage:
- 4.5V~5.5V for MG87FE52
- 2.4V~3.6V for MG87FL52
- Built-in Low-Voltage-Reset circuit
- Operating Temperature range from -40°C to +85°C.
- Maximum Operating Frequency:
- Up to 48MHz at12T mode or 24MHz at 6T mode, Industrial range.
Categories: 8051 8-Bit MCU, Micro-Controllers
Get Best QuoteRequest A Callback
MG82F6D17AL20 Megawin 8051 MCU
Product Price: Rs 35.00 / PieceGet Best Price
Product Brochure
Product Details:
Brand | Megawin |
RAM Size | 256B + 768B |
Model Number | MG82F6D17AL20 |
Operating Voltage | 1.8V~5.5V |
Package | SSOP-20 |
Communication | UART x 2, SPI, TWI(I2C), STWI, LIN, CRC16 |
Flash ROM | 16 KB |
-
- 1-T 80C51 Central Processing Unit
- MG82F6D17 with 16K Bytes flash ROM
- ISP memory zone could be optioned as 0.5KB/1.0KB~7.5KB
- Flexible IAP size by software configured
- Code protection for flash memory access
- Flash write/erase cycle: 20,000 times
- Flash data retention: 100 years at 25℃
- Default MG82F6D17 Flash space mapping
- AP 13.5KB 0000h~35FFh
- IAP 1.0KB 3600h~39FFh
- ISP 1.5KB 3A00h~3FFFh
- Data RAM : 1K Bytes
- On-chip 256 bytes scratch-pad RAM
- 768 bytes expanded RAM (XRAM)
- Support page select on XRAM access
- Dual data pointer
- Provide one channel DMA engine
- P2P, M2P, P2M
- Memory target: XRAM
- Peripheral target: UART0, UART1, SPI, TWI0/I2C0, ADC12 & CRC16
- Timer 5 and Timer 6 are used for DMA, but it also can be traded as independent timer when DMA not in use
- Interrupt controller
- 16 sources, four-level-priority interrupt capability
- Three external interrupt inputs, nINT0, nINT1 and nINT2, with glitch filter
- All external interrupts support High/Low level or Rising/Falling edge trigger
- Total 9/10 timers in MG82F6D17
- RTC Timer and WDT Timer
- Timer 0, Timer 1, Timer 2 and Timer 3
- PCA0, Program Counter Array 0
- S0 BRG and S1 BRG
- If Timer 2/3 in split mode, then total 10 timers
- Four 16-bit timer/counters, Timer 0, Timer 1, Timer 2 and Timer 3
- X12 mode and timer clock output function
- Synchronous Run-Enable on all timer (same function on Stop and Reload)
- New 5 operating modes in Timer 2/3 with 8 clock sources and 8 capture sources
- Timer 2/3 can be split to two 8-bit timers
- Clock Count Output (CCO) on T2CKO and T3CKO
- All timers support PWM mode
Categories: 8051 8-Bit MCU, Micro-Controllers
Get Best QuoteRequest A Callback
MG82F6D17AE20 Megawin 8051 MCU
Product Price: Rs 45.00 / PieceGet Best Price
Product Brochure
Product Details:
Brand | Megawin |
RAM Size | 256B + 768B |
Operating Voltage | 1.8V~5.5V |
Communicaton | UART x 2, SPI, TWI(I2C), STWI, LIN, CRC16 |
Model Number | MG82F6D17AE20 |
- 1-T 80C51 Central Processing Unit
- MG82F6D17 with 16K Bytes flash ROM
- ISP memory zone could be optioned as 0.5KB/1.0KB~7.5KB
- Flexible IAP size by software configured
- Code protection for flash memory access
- Flash write/erase cycle: 20,000 times
- Flash data retention: 100 years at 25℃
- Default MG82F6D17 Flash space mapping
- AP 13.5KB 0000h~35FFh
- IAP 1.0KB 3600h~39FFh
- ISP 1.5KB 3A00h~3FFFh
- Data RAM : 1K Bytes
- On-chip 256 bytes scratch-pad RAM
- 768 bytes expanded RAM (XRAM)
- Support page select on XRAM access
- Dual data pointer
- Provide one channel DMA engine
- P2P, M2P, P2M
- Memory target: XRAM
- Peripheral target: UART0, UART1, SPI, TWI0/I2C0, ADC12 & CRC16
- Timer 5 and Timer 6 are used for DMA, but it also can be traded as independent timer when DMA not in use
- Interrupt controller
- 16 sources, four-level-priority interrupt capability
- Three external interrupt inputs, nINT0, nINT1 and nINT2, with glitch filter
- All external interrupts support High/Low level or Rising/Falling edge trigger
- Total 9/10 timers in MG82F6D17
- RTC Timer and WDT Timer
- Timer 0, Timer 1, Timer 2 and Timer 3
- PCA0, Program Counter Array 0
- S0 BRG and S1 BRG
- If Timer 2/3 in split mode, then total 10 timers
- Four 16-bit timer/counters, Timer 0, Timer 1, Timer 2 and Timer 3
- X12 mode and timer clock output function
- Synchronous Run-Enable on all timer (same function on Stop and Reload)
- New 5 operating modes in Timer 2/3 with 8 clock sources and 8 capture sources
- Timer 2/3 can be split to two 8-bit timers
- Clock Count Output (CCO) on T2CKO and T3CKO
- All timers support PWM mode
Categories: 8051 8-Bit MCU, Micro-Controllers
Get Best QuoteRequest A Callback
MG82F6D16AE28 Megawin 8051 MCU
Product Price: Rs 50.00 / PieceGet Best Price
Product Brochure
Product Details:
Brand | Megawin |
Package Type | DIP-28 |
Operating Voltage | 1.8-5.5V |
Communication | UARTx2, SPI, LIN, I2C, S/W I2C, CRC16 |
Model Number | MG82F6D16AE28 |
-
- 1-T 80C51 Central Processing Unit
- MG82F6D16 with 16K Bytes flash ROM
- ━ ISP memory zone could be optioned as 0.5KB/1.0KB~7.5KB
- ━ Flexible IAP size configured by software
- ━ Code protection for flash memory Access
- ━ Flash write/erase cycle: 20,000
- ━ Flash data retention: 100 years at 25°C
- ━ Default MG82F6D16 Flash space mapping
- AP Flash default mapping (13.5KB, 0000h~35FFh)
- IAP Flash default mapping (1.0KB, 3600h~39FFh)
- ISP Flash default mapping (1.5KB, 3A00h~3FFFh), ISP Boot code
- Data RAM: 1K Bytes
- ━ On-chip 256 bytes scratch-pad RAM
- ━ 768 bytes expanded RAM (XRAM) for 6D16
- ━ Support page select on XRAM Access in 6D16
- Dual data pointer
- Interrupt controller
- ━ 14 sources, four-level-priority interrupt capability
- ━ Three external interrupt inputs, nINT0, nINT1 and nINT2, with glitch filter
- ━ All external interrupts support High/Low level or Rising/Falling edge trigger
- Total 6 timers in MG82F6D16
- ━ RTC Timer and WDT Timer
- ━ Timer 0, Timer 1 and Timer 2
- ━ PCA0, Program Counter Array 0
- ━ If Timer 2 in split mode, then total 7 timers
- Maximum 25 GPIOs in 28-pin package
- ━ P3 can be configured to quasi-bidirectional, push-pull output, open-drain output and input only
- ━ P0, P1, P2, P4 and P6 can be configured as open-drain output or push-pull output
- ━ P6.0, P6.1 and P4.7 shared with XTAL2, XTAL1 and RST
- ━ Programmable GPIO driving strength
- ━ On chip pull-up enable on each pin
Categories: 8
Get Best QuoteRequest A Callback
MG82F6D32AD Megawin 8051 MCU
Product Price: Rs 75.00 / PieceGet Best Price
Product Brochure
Product Details:
Brand | Megawin |
RAM Size | 2048B |
Flash ROM | 32 KB |
Communication | UART x 2, SPI, TWI(I2C) x 2, STWI, LIN CRC16 |
Packages | LQFP-32, LQFP-48, QFN-32 Datasheet |
Model Number | MG82F6D32AD |
- 1-T 80C51 Central Processing Unit
- MG82F6D32 with 32K Bytes flash ROM
- ━ ISP memory zone could be optioned as 0.5KB/1.0KB~7.5KB
- ━ Flexible IAP size by software configured
- ━ Code protection for flash memory access
- ━ Flash write/erase cycle: 20,000
- ━ Flash data retention: 100 years at 25°C
- ━ Default MG82F6D32 Flash space mapping
- AP Flash default mapping (29.5KB, 0000h~75FFh)
- IAP Flash default mapping (1.0KB, 7600h~79FFh)
- ISP Flash default mapping (1.5KB, 7A00h~7FFFh), ISP Boot code
- Data RAM:
- ━ On-chip 256 bytes scratch-pad RAM
- ━ MG82F6D32 – 1792 bytes expanded RAM (XRAM)
- ━ Support page select on XRAM access
- Dual data pointer
- External Memory Bus interface (EMB)
- ━ Only support No Address mode access (LCD 8080 I/F)
- Provide one channel DMA engine
- ━ P2P, M2P, P2M
- ━ Memory target: on-chip XRAM & EMB
- ━ Peripheral target: UART0/1/2/3, SPI, TWI0/I2C0, I2C1, ADC12, EMB & CRC16
- ━ Timer 5 and Timer 6 are used for DMA, but it also can be traded as independent timer when DMA not in use
- Interrupt controller
- ━ 24 sources, four-level-priority interrupt capability
- ━ Four external interrupt inputs, nINT0, nINT1, nINT2 and nINT3 with glitch filter
- ━ All external interrupts support High/Low level or Rising/Falling edge trigger
- total 13/15(with split mode) timers in MG82F6D32
- ━ RTC Timer and WDT Timer
- ━ Timer 0, Timer 1, Timer 2, Timer 3 and Timer 4 (Timer 4 not support by MG82F6D32)
- ━ PCA0, Program Counter Array 0
- ━ S0 BRG, S1 BRG, S2 BRG and S3 BRG
- ━ If Timer 2/3/4 in split mode, MG82F6D32 has total 15 timers
- ━ Timer 5/6 of DMA module also can be used as timer
- 7 16-bit timer/counters, Timer 0, Timer 1, Timer 2, Timer 3, Timer 5, Timer 6
- ━ X12 mode and timer clock output function
- ━ Synchronous control of Run-Enable, Stop and Reload on Timer 0~4
- ━ New 5 operating modes in Timer 2/3/4 with 8 clock sources and 8 capture sources
- ━ Timer 2/3/4 can be split to two 8-bit timers
- ━ Clock Count Output (CCO) on T2CKO, T3CKO
- ━ Timer 0~4 support PWM mode
- ━ Timer 2/3/4 support Duty Capture function
Categories: 8051 8-Bit MCU, Micro-Controllers
Get Best QuoteRequest A Callback
MPC89E515AE Megawin 8051 MCU
Product Price: Rs 135.00 / PieceGet Best Price
Product Brochure
Product Details:
Brand | Megawin |
RAM Size | 256B + 1024B |
Flash ROM | 63 KB |
Operating Voltage | 4.5 - 5.5V |
Communication | UART |
Package | DIP-40 |
-
- 80C51 Central Processing Unit
- 8KB On-Chip program memory for program ROM, ISP ROM & IAP zone.
- ISP capability; optional 0.5K/1KB/1.5K~3.5KB ISP memory shared with 8KB flash memory.
- IAP capability; program-controlled IAP memory size shared with 8KB flash memory.
- On-Chip 256 bytes scratch-pad RAM. Also, the MCU can address up to 64K bytes external memory.
- MOVC-disabling, encrypting, and locking flash memory realize security mechanism.
- Three 16-bits timer/counter, Timer2 is an up/down counter with programmable clock output on P1.0
- Eight sources, four-level-priority interrupt capability
- Enhanced UART, provides frame-error detection and hardware address-recognition
- Dual DPTR for fast accessing of data memory
- 15 bits Watch-Dog-Timer with 8-bits pre-scaler, one-time enabled
- Low EMI: inhibits ALE emission
- Power control: Idle mode and Power-Down mode; Power-Down can be woken-up by P3.2/P3.3/P4.2/P4.3, Idle mode could be woken up by all interrupt sources.
- I/O port: 32+4 I/O ports :
- PDIP-40 (MG87FE/L52AE ) has 32 I/O ports;
- PLCC-44 & PQFP-44(MG87FE/L52AP, MG87FE/L52AF) will have 36 I/O ports
- On-Chip flash program/data memory:
- The data endurance of the embedded flash gets over 20,000 times
- Greater than 100 years data retention under room temperature. (at 25℃)
- Operating Voltage:
- 4.5V~5.5V for MG87FE52,
- 2.4V~3.6V for MG87FL52, minimum 2.7V requirement in flash write operation
- Built-in Low-Voltage-Reset circuit
- Operating Temperature range from -40°C to +85°C.
- Maximum Operating Frequency: – Up to 48MHz at 12T mode or 24MHz at 6T mode, Industrial range.
Categories: 8051 8-Bit MCU, Micro-Controllers
Get Best QuoteRequest A Callback
MG82F6D64AD Megawin 8051 MCU
Product Price: Rs 85.00 / PieceGet Best Price
Product Brochure
Product Details:
Brand | Megawin |
Flash ROM | 64k/32k bytes |
Model Number | MG82F6D64AD |
-
- 1-T 80C51 Central Processing Unit
- MG82F6D64 with 64K Bytes flash ROM
- ━ ISP memory zone could be optioned as 0.5KB/1.0KB~7.5KB
- ━ Flexible IAP size by software configured
- ━ Code protection for flash memory access
- ━ Flash write/erase cycle: 20,000
- ━ Flash data retention: 100 years at 25°C
- ━ Default MG82F6D64 Flash space mapping
- AP Flash default mapping (61.5KB, 0000h~F5FFh)
- IAP Flash default mapping (1.0KB, F600h~F9FFh)
- ISP Flash default mapping (1.5KB, FA00h~FFFFh), ISP Boot code
- Data RAM:
- ━ On-chip 256 bytes scratch-pad RAM
- ━ MG82F6D64 – 3840 bytes expanded RAM (XRAM)
- ━ Support page select on XRAM access
- Dual data pointer
- External Memory Bus interface (EMB)
- ━ Only support No Address mode access (LCD 8080 I/F)
- Provide one channel DMA engine
- ━ P2P, M2P, P2M
- ━ Memory target: on-chip XRAM & EMB
- ━ Peripheral target: UART0/1/2/3, SPI, TWI0/I2C0, I2C1, ADC12, EMB & CRC16
- ━ Timer 5 and Timer 6 are used for DMA, but it also can be traded as independent timer when DMA not in use
- Interrupt controller
- ━ 24 sources, four-level-priority interrupt capability
- ━ Four external interrupt inputs, nINT0, nINT1, nINT2 and nINT3 with glitch filter
- ━ All external interrupts support High/Low level or Rising/Falling edge trigger
- Total 14/ 17(with split mode) timers in MG82F6D64, and total 13/15(with split mode) timers in MG82F6D32
- ━ RTC Timer and WDT Timer
- ━ Timer 0, Timer 1, Timer 2, Timer 3 and Timer 4
- ━ PCA0, Program Counter Array 0
- ━ S0 BRG, S1 BRG, S2 BRG and S3 BRG
- ━ If Timer 2/3/4 in split mode, MG82F6D64 has total 17 timers.
- ━ Timer 5/6 of DMA module also can be used as timer
- 7 16-bit timer/counters, Timer 0, Timer 1, Timer 2, Timer 3, Timer 4 , Timer 5, Timer 6
- ━ X12 mode and timer clock output function
- ━ Synchronous control of Run-Enable, Stop and Reload on Timer 0~4
- ━ New 5 operating modes in Timer 2/3/4 with 8 clock sources and 8 capture sources
- ━ Timer 2/3/4 can be split to two 8-bit timers
- ━ Clock Count Output (CCO) on T2CKO, T3CKO and T4CKO
- ━ Timer 0~4 support PWM mode
- ━ Timer 2/3/4 support Duty Capture function
Categories: 8051 8-Bit MCU, Micro-Controllers
Get Best QuoteRequest A Callback
MG82F6B001AS8 Megawin 8051 MCU
Product Price: Rs 150 / PieceGet Best Price
Product Brochure
Product Details:
Brand | Megawin |
RAM Size | 1KB |
Dimensions | 4.9x3.9x1.4 |
Operating Frequency | 16MHz (max) |
Package | SOP8 |
Model Number | MG82F6B001AS8 |
Operating Voltage | 2.4-5.5V |
Communication | UART x 1, SPI, LIN, S/W I2C, TWI(I2C), CRC16 |
1-T 80C51 Central Processing Unit
- Stack Pointer warning indicator
MG82F6B001 with 8K Bytes Flash ROM & 512 Bytes EEPROM
- ISP memory zone could be optioned as 0.5KB/1.0KB~3.5KB
- 512 Bytes EEPROM write/erase cycle: 100,000
- Flexible IAP size by software configured
- Code protection for Flash memory access
- Flash write/erase cycle: 20,000
- Flash data retention: 100 years at 25°C
- Default MG82F6B001 Flash space mapping
AP Flash default mapping (6.5KB, 0000h~19FFh)
IAP Flash default mapping (Disabled)
ISP Flash default mapping (1.5KB, 1A00h~1FFFh), ISP Boot code
Data RAM: 1K Bytes
- On-chip 256 bytes scratch-pad RAM
- 768 bytes expanded RAM (XRAM)
- Support page select on XRAM access Dual data pointer
Interrupt controller
- 12 sources, four-level-priority interrupt capability
- Two external interrupt inputs, nINT0, nINT1 with glitch filter
- All external interrupts support High/Low level or Rising/Falling edge trigger
Total 7/8 (with split mode) timers in MG82F6B001
- RTC Timer and WDT Timer
- Timer 0, Timer 1, Timer 2
- PCA0, Program Counter Array 0
- S0 BRG
- If Timer 2 in split mode, MG82F6B001 has total 8 timers
Three 16-bit timer/counters, Timer 0, Timer 1, Timer 2
- Synchronous control of Run-Enable, Stop and Reload on Timer 0~2
- New 6 operating modes in Timer 2 with 8 clock sources and 8 capture sources
- Timer 2 can be split to two 8-bit timers
- Clock Count Output (CCO) on T2CKO
- Timer 0~2 support PWM mode
- Timer 2 support Duty Capture function
Categories: 8051 8-Bit MCU, Micro-Controllers
Get Best QuoteRequest A Callback